Oregon 200VXLGK095 Chainsaw Guide Bar Click to zoom

Oregon 200VXLGK095 VersaCut 20 in. Chainsaw Guide Bar, .325 Pitch, .050 Gauge, K095 Mount

MPN 200VXLGK095

In stockChainsaw Guide Bar

Specifications

Brand
Oregon
MPN
200VXLGK095
Also listed as
697A-200VXLGK095
Bar length
20 in.
Pitch
.325 in.
Gauge
.050 in.
Mount
K095
Weight
2.39 lb

Overview

The Oregon 200VXLGK095 is a 20 in. VersaCut guide bar for chainsaws that run .325 in. pitch chain with .050 in. gauge. Oregon built the VersaCut line for arborists and landowners who switch between pruning and felling, and the bar uses a light aluminum core. Match the bar mount and chain specs to your saw before ordering.

Key features

  • 20 in. bar length
  • .325 in. pitch with .050 in. gauge
  • K095 bar mount
  • Large-radius nose, listed for reduced kickback
  • Aluminum core for a light, strong bar

Fits

  • Engines/Models: Listed for select Cub Cadet, Dolmar, Homelite, Husqvarna and John Deere saws, among others.
  • Typical equipment: Chainsaws that take a 20 in., .325 pitch, .050 gauge VersaCut bar with a K095 mount.
  • Compare the bar length, pitch, gauge and mount on your old bar with the specs above. Find your saw's model and serial number on its product label and send them to us before you order.

Specifications

Brand Oregon
MPN 200VXLGK095
Also listed as 697A-200VXLGK095
Bar length 20 in.
Pitch .325 in.
Gauge .050 in.
Mount K095
Weight 2.39 lb

Frequently asked questions

Does this bar fit my chainsaw?

Fit depends on the bar mount, chain pitch and gauge. This bar is listed for .325 in. pitch with a K095 mount, and it is used on select Cub Cadet, Dolmar, Homelite, Husqvarna and John Deere saws. Send us your saw's model and serial number and we will confirm before you order.

What chain pitch and gauge does it use?

The bar is listed for .325 in. pitch chain with a .050 in. gauge.

Is this a genuine Oregon part?

It is sold under Oregon's own part number 200VXLGK095 and carries the Oregon brand.

Is the 200VXLGK095 the same as 697A-200VXLGK095?

One listing shows 697A-200VXLGK095 for this same 20 in. VersaCut bar. Check the number on your old bar before ordering.

How do I confirm my bar before ordering?

Check the bar length, pitch and gauge against your old bar or chain packaging, then send us your saw's model and serial number so we can confirm the mount.

$100 minimum order (or add a $20 handling fee)